Cozy Mark IV Building Progress (Plan # 1217)
Chapter 9: Main Gear and Landing Brake
Started 7/27/2008
Home
Cozy Mark IV Building Progress (Plan # 1217)
Home
|
|
|
Completed Week Ending July 27th, 2008 |
||||
Main Langing Gear Sanded |
Main Landing Gear Ends Cut |
Main Gear Mounted for Layup |
Trailing Edge Layup Complete |
Brake Line Conduit Attached |
Brake Line Conduit Glassed In |
||||
|
Completed Week Ending August 31st, 2008 |
||||
Attach Tab Jig Built |
Attach Tabs Layed Out |
Attach Tabs Outside Layup Complete |
Attach Tabs Outside Alignment Holes Drilled |
Attach Tabs Outside Rough Cut |
|
Completed Week Ending September 7th, 2008 |
||||
Landing Gear Tabs Complete |
Landing Gear Bulkhead Reinforcements Glassed In |
|||
|
Completed Week Ending September 28th, 2008 |
||||
Landing Gear Trial Fit |
Landing Gear Trial Fit (Shot 2) |
MG Pads Ready to Drill |
||
|
Completed Week Ending October 5th, 2008 |
||||
Attach Tabs Drilled Out Full Size |
MG1 and MG2 Drilled and Mounted |
Landing Brake Cut From Fuselage |
LB19 and LB23 Cut Out |
|
|
Completed Week Ending November 9th, 2008 |
||||
LB23 With Aluminum Slugs |
LB19 Attached to Landing Brake |
Landing Brake Recess Cut and Contoured |
Main Gear Attachment Drilled to Size |
Main Gear Bushing Floxed In |
|
Completed Week Ending July 5th, 2009 |
||||
Attach Tabs Final Layup |
Attach Tabs Completed |
|||
|
Completed Week Ending July 19th, 2009 |
||||
Landing Brake Fuselage Being Glassed |
Landing Brake Fuselage Completed |
Landing Brake Underside Being Glassed |
Landing Brake Attached |
Electric Speed Brake Actuator Attached |
Electric Speed Brake Actuator Attached |
||||